High performance Motor
Our kits are designed to bolt on carbureted 22R toyota truck motors, and are designed to use your existing carburetor throttle plates. These are excellent conversions - very simple and clean. Most customers report back an increase in power!Installation time should take 2 to 5 hours depending on your experience (this includes removal of your existing fuel system). There is little to no fabrication required. 20r kits require the use of a 22r carb base and a 22r carb to 20r manifold carb adapter from L.C. engineering.
We now have a kit designed to use the E.F.I. engine. They are designed to run propane only. Lose that smashed up gas tank and poor driveability due to faulty sensors and old wiring with bad connections. It requires a carbureted distributor and ignition coil. It retains the stock intake manifold and throttle cables. It is designed to remove all of the e wiring and sensors related to gasoline, resulting in two wires reqiured to power the engine!
We usually use about 5 to 6 gallons if we run the truck non-stop all day. This is rock crawling/ trail running, about 8 good ones! A tyrical day of normal trail riding uses about 4 gallons. There is no loss in power with these kits, only power gains!! These are legal for road use depending on local emissions laws.
Note: These are not forklift kits! Don't be fooled by other companys (EBAY) that claim to be the same. Unfortunately this is not the truth. There are several very important di erences that a ect power and longevity.
The equipment in the ebay toyota kits are exactly the same as my own forklift. It is equivelant to a one barrel carburetor! Compare it to my samuri kit minus parts! The dollar di erence is in the equipment.BACK TO THE PARTS PAGE