REAR END AXLE & SUSPENSION
YODAMAN DOUBLE DROP SHACKLES
Rancho 99000 Shocks
Nine way adjustable set soft for trail or set stiff for winding highways heading to the trails.
BACK TO THE PARTS PAGE
BILSTEIN SHOCKS
REAR CHEVY 63'inch SPRINGS
Yodaman #1 Choice
For rear springs 63" in lenth give's 5" lift with no blocks 1" center pin forward for proper tire clearence. See Yodaman's double drop shackles to complete the set up. Rear frame hanger no modifications needed
BACK TO THE PARTS PAGE
ROCK ASSAULT
This exclusive design features axle tubes that have been offset above the housing centerline.The inner axles ride near the bottom of the axle tubes rather than in the center.The results are an increase of 3/8'' ground clearance under the axle tubing. Axle tubes are made from 1/4'' thick DOM tubing.The heavy-duty, press formed, 1/4'' plate steel center section shell is specially shaped to ensure a minimum of 3/4" additional clearance under the differential.The differential mounting surface is made from 1/2'' plate steel to ensure studs can not pull out, even under heavy loads.The outer offset flanges are made from 4130 Chromoly to prevent distortion or bending.Housings are precision alignment checked using start-of-the-art, 3D digital imaging equipment.The Rock-Assault axle housings use stock or aftermarket 1986-1995 Toyota Pickup/4Runner axle shafts. An optional fill / inspection cap can be installed for an additional fee. Additional lengths as well as front applications will be available soon.
BACK TO THE PARTS PAGE
Stock & Heavy Duty Rear Axles
Big tires and low crawler gears can, and do lead to broken rear axles. If you are looking to upgrade your drivetrain, check out our heavy-duty chromoly rear axles. These axles feature a break strength of 8,300 ft-lbs or torque and up to 120 degrees of twist. Lifetime Warranty on chromoly rear axles.
BACK TO THE PARTS PAGE
Rear Axle Bearing Service Kit
Kit includes all normally replaced parts for servicing left or right rear axle on 1979-1995 Toyota 4x4 Pickups and 4Runners. Kit Includes: Koyo axle bearing, axle housing seal, axle bearing retainer, outer axle rubber seal, c-clip, axle o-ring.
BACK TO THE PARTS PAGE
REAR DISC BRAKE CONVERSION KIT
Looking for rear disc brakes for your truck or 4Runner? We have all the parts you need to do the conversion. The basic disc brake kit includes rotors, GM metric calipers, brackets, brake lines and bolts. Requires a Master Cylinder or a residual valve.
BACK TO THE PARTS PAGE
Wheel Lug Nuts & Studs
Replacement nuts are available in both open style and closed acorn style. M12 X 1.50 threads. Wheel studs are for rear axle application.
BACK TO THE PARTS PAGE
Flip Socket
For installing wheels and spacers this is the right tool for the job. 17mm on one end and 19mm" on the other. Thin wall design fits better than standard sockets. This socket is rated for use with an impact gun. 1/2" drive..
BACK TO THE PARTS PAGE